The display of a dual-zone wine cooler in a dim kitchen blinking a warm reading in its upper zone, the door closed on rows of unlabeled bottles.

KitchenAid Over Temp on a wine cooler: a zone is above its set limits

KitchenAid gives this alert when either zone of its 24-inch undercounter wine unit rises above the preset range.

(844) 709-0727

Mon–Sat, 8am–8pm

  • Temperature and alarms
  • Wine cooler thermostat and sensor repair
  • Source: KitchenAid

Book a visit

Three short steps, about a minute.

or call (844) 709-0727

What Over Temp
actually means.

KitchenAid gives this alert when either zone of its 24-inch undercounter wine unit rises above the preset range. Its product page adds that a cabinet above 70°F for more than 4 hours means the alarm is telling you service is needed.

KitchenAid wine cooler display · also shown as Over Temperature alarm, Reset Alarm

What to do when Over Temp shows on the wine cooler

Before you book,
in this order.

Each step comes from KitchenAid's own guidance for Over Temp on its wine coolers. Follow it to the end: the last card says whether this is a visit.

01

Press Reset Alarm to stop the flashing, then make sure the door is closed and the base grille is not blocked.

02

Check each zone with a thermometer; if one is near room temperature, move your best bottles somewhere cool and dark.

03

Give a zone that warmed after a long door opening or a big restock several hours with the door shut.

04

If the light comes back after a reset with the door shut, book a visit.

Still there?

It usually turns into wine cooler thermostat and sensor repair. Book with the code and the model number.

What not to do

Over Temp does not say which part has failed, and it is not the door alarm, which has its own pattern. If the unit is still warm when you reset it, KitchenAid has the light come back every 4 hours, so a repeat is expected until the cause is fixed.

What you may
notice with it.

The wine cooler problems Over Temp tends to arrive with. Answer these at the wine cooler before anyone is booked.

All problems

Where Over Temp usually leads

Wine cooler thermostat and sensor repair.

Thermostat or zone temperature sensor · low to moderate.

In KitchenAid's own words

if the temperature in either zone rises above the preset range for 10 minutes
KitchenAid Product Help: Over Temp KitchenAid Product Help: Over Temperature Alarm KitchenAid product page, KUWR314KBS 24-inch undercounter wine unit (archived)

Every code on this site is taken from the manufacturer's documentation, never from a forum or a parts listing. KitchenAid 24-inch undercounter dual-zone wine units such as KUWR314 and KUWL524. KitchenAid names the product a wine cellar.

KitchenAid Over Temp wine cooler repair,
where we come out.

The same visit in every metro below: the code, the model number, and a diagnosis before any part is ordered.

All service areas
A couple choosing a bottle together from an undercounter wine cooler in a warm kitchen at dusk
For the heart of your home.

Questions
about Over Temp.

Can I clear Over Temp myself?
Press Reset Alarm to stop the flashing, then make sure the door is closed and the base grille is not blocked. If it comes back, it needs a visit.
Does the beeping stop by itself on a KitchenAid Over Temp alert?
The sound stops once the temperature is back in range, but the light keeps flashing until you press Reset Alarm. That way you still know it happened.
Why does the Over Temp light keep coming back on my KitchenAid wine cooler?
If the zone is still warm when you reset it, the light returns every 4 hours. That repeat is the unit telling you the cause has not gone away.
Can a blocked grille cause Over Temp on a KitchenAid undercounter wine cooler?
Yes. A unit built in under the counter has to vent at the front, so a rug, toe kick trim or boxes stacked in front of the grille can make it run warm.

Back to your everyday

Still showing Over Temp?

When you book, copy the code or the blink pattern as the display shows it, add the whole model number, and say whether the bottles still feel cool — a code gives the technician a head start.

(844) 709-0727 Schedule a repair