The display of a dual-zone wine cooler in a dim kitchen blinking a warm reading in its upper zone, the door closed on rows of unlabeled bottles.

Liebherr temperature alarm: the wine cabinet is outside its set temperature

On Touch & Swipe models the Temperature alarm message appears when the cabinet temperature does not match the setting; pressing confirm shows the warmest temperature reached.

(844) 709-0727

Mon–Sat, 8am–8pm

  • Temperature and alarms
  • Wine cooler thermostat and sensor repair
  • Source: Liebherr

Book a visit

Three short steps, about a minute.

or call (844) 709-0727

What Temperature alarm
actually means.

On Touch & Swipe models the Temperature alarm message appears when the cabinet temperature does not match the setting; pressing confirm shows the warmest temperature reached. Liebherr names warm bottles, too much room air during loading, a long power cut, or a defect as causes. HW columns sound a tone and flash the temperature display instead, and ask for service if the reading is still wrong after an hour.

Liebherr wine cooler display · also shown as Flashing temperature display

What to do when Temperature alarm shows on the wine cooler

Before you book,
in this order.

Each step comes from Liebherr's own guidance for Temperature alarm on its wine coolers. Follow it to the end: the last card says whether this is a visit.

01

Press the confirmation or Alarm button to stop the tone and read the warmest temperature shown.

02

Close the door, keep it shut and give the cabinet time after any large load of bottles.

03

If the reading is still out of range after an hour with the door shut, move the most valuable bottles somewhere cool and dark and book a visit.

Still there?

It usually turns into wine cooler thermostat and sensor repair. Book with the code and the model number.

What not to do

A temperature alarm after loading or a power cut is usually harmless and clears as the cabinet recovers. One that returns with nothing loaded points to a fan, sensor or the sealed system.

What you may
notice with it.

The wine cooler problems Temperature alarm tends to arrive with. Answer these at the wine cooler before anyone is booked.

All problems

Where Temperature alarm usually leads

Wine cooler thermostat and sensor repair.

Thermostat or zone temperature sensor · low to moderate.

In Liebherr's own words

temperature does not match the
Liebherr W5250 operating instructions, warnings Liebherr HW use and care manual, temperature alarm Liebherr HW use and care manual, after one hour

Every code on this site is taken from the manufacturer's documentation, never from a forum or a parts listing. Liebherr Touch & Swipe wine cabinets such as UW3720 and W5250 (message on the display) and HW 3000, HW 4800 and HW 8000 built-in columns (flashing temperature display).

Liebherr Temperature alarm wine cooler repair,
where we come out.

The same visit in every metro below: the code, the model number, and a diagnosis before any part is ordered.

All service areas
A couple choosing a bottle together from an undercounter wine cooler in a warm kitchen at dusk
For the heart of your home.

Questions
about Temperature alarm.

Can I clear Temperature alarm myself?
Press the confirmation or Alarm button to stop the tone and read the warmest temperature shown. If it comes back, it needs a visit.
What is the warmest temperature a Liebherr wine cabinet shows after an alarm?
It is the highest temperature the cabinet reached during the event. Use it to judge whether the wine saw real heat.
Why does my Liebherr HW column display keep flashing?
A flashing temperature means the reading is outside the permitted range; it stops once the set value is reached. If it keeps flashing after an hour, book a visit.
Can a Liebherr wine cabinet alarm for being too cold?
Yes. The HW manual covers readings that are too high or too low.

Back to your everyday

Still showing Temperature alarm?

When you book, copy the code or the blink pattern as the display shows it, add the whole model number, and say whether the bottles still feel cool — a code gives the technician a head start.

(844) 709-0727 Schedule a repair