The hinge side of a wine cooler's glass door standing slightly ajar, a gap of light visible along the gasket and the end of a wooden rack jutting toward it.

Miele under-counter wine unit: alarm symbol with both zone buttons flashing

The under-counter wine units sound an alarm when the door has been open for more than 2 minutes.

(844) 709-0727

Mon–Sat, 8am–8pm

  • Door and seal
  • Wine cooler glass door and gasket repair
  • Source: Miele

Book a visit

Three short steps, about a minute.

or call (844) 709-0727

What Alarm symbol with both zone buttons flashing
actually means.

The under-counter wine units sound an alarm when the door has been open for more than 2 minutes. Both zone sensor buttons flash on the control panel and the alarm symbol lights in the display. Closing the door ends the tone, the flashing and the symbol.

Miele wine cooler display · also shown as Door alarm

What to do when Alarm symbol with both zone buttons flashing shows on the wine cooler

Before you book,
in this order.

Each step comes from Miele's own guidance for Alarm symbol with both zone buttons flashing on its wine coolers. Follow it to the end: the last card says whether this is a visit.

01

Close the door and check that the symbol goes out.

02

Look for a bottle or shelf keeping the door from sealing, and wipe the gasket.

03

Book a visit if the alarm continues with the door closed.

Still there?

It usually turns into wine cooler glass door and gasket repair. Book with the code and the model number.

What not to do

Both buttons flashing means the door; a single zone button flashing means a temperature alarm in that zone. If the tone does not sound at all with the door open, it may simply be switched off in settings mode.

What you may
notice with it.

The wine cooler problems Alarm symbol with both zone buttons flashing tends to arrive with. Answer these at the wine cooler before anyone is booked.

All problems

Where Alarm symbol with both zone buttons flashing usually leads

Wine cooler glass door and gasket repair.

Door gasket, hinge adjustment or glass door · low.

In Miele's own words

An acoustic alarm will sound if the door has been left open for longer than 2 minutes.
Miele KWT 6322 UG operating instructions, door alarm Miele KWT 6322 UG operating instructions, door alarm display

Every code on this site is taken from the manufacturer's documentation, never from a forum or a parts listing. Miele KWT 6322 UG under-counter wine conditioning units.

Miele Alarm symbol with both zone buttons flashing wine cooler repair,
where we come out.

The same visit in every metro below: the code, the model number, and a diagnosis before any part is ordered.

All service areas
A couple choosing a bottle together from an undercounter wine cooler in a warm kitchen at dusk
For the heart of your home.

Questions
about Alarm symbol with both zone buttons flashing.

Can I clear Alarm symbol with both zone buttons flashing myself?
Close the door and check that the symbol goes out. If it comes back, it needs a visit.
How do I tell a door alarm from a temperature alarm on a Miele under-counter unit?
Count the flashing zone buttons: both mean the door, one means that zone's temperature has moved.
Can the door alarm be switched off?
Its tone can: settings mode has a level that turns off the button tone and door alarm. The visual signal still appears.
The alarm keeps sounding after I close the door. What now?
Check the gasket and the door alignment; if both are fine, book a visit for the door switch.

Back to your everyday

Still showing Alarm symbol with both zone buttons flashing?

When you book, copy the code or the blink pattern as the display shows it, add the whole model number, and say whether the bottles still feel cool — a code gives the technician a head start.

(844) 709-0727 Schedule a repair