The touch control strip along the top of a glass-door wine cooler, a small padlock icon lit beside the temperature, unlabeled bottles lying on the wooden racks below.

Electrolux 1A or 2A on the wine cooler display: the light setting

Holding the light button for 3 seconds on the EI24WC15V generation switches between two light settings and shows the code for 2 seconds.

(844) 709-0727

Mon–Sat, 8am–8pm

  • Mode, not a failure
  • No repair needed
  • Source: Electrolux

Book a visit

Three short steps, about a minute.

or call (844) 709-0727

Before you book,
in this order.

Each step comes from Electrolux's own guidance for 1A / 2A on its wine coolers. Follow it to the end: the last card says whether this is a visit.

01

Hold the light button for 3 seconds to switch between 1A and 2A.

02

Choose 1A for long-term storage, because a light left on adds a little heat.

03

If the light will not change or stay off with the door shut, book a visit to check the door switch.

Cleared?

The display has gone quiet and the cabinet is back at its setting without a new part. Should the code reappear this week, or the reds start feeling warm again, book a visit and mention that it came back.

What not to do

1A and 2A do not report a problem. A cabinet that runs slightly warm with 2A set is simply heated by the light.

What you may
notice with it.

The wine cooler problems 1A / 2A tends to arrive with. Answer these at the wine cooler before anyone is booked.

All problems

No repair indicated

Nothing to repair.

A setting someone switched on, often by leaning on the touch panel or left over from the showroom floor, rather than a part that wore out: a demo mode that lights the display and the rack lamps while the cooling never starts, a Sabbath setting that turns off the lights and alarms, a child or control lock that ignores every key press, a reminder that the glass door stood open. The cabinet is fine, and its own keys or its manual switch the mode back off.

In Electrolux's own words

Temperature display shows the light setting code
Electrolux use and care guide A16345301 (EI24WC15V generation)

Every code on this site is taken from the manufacturer's documentation, never from a forum or a parts listing. Electrolux EI24WC15VS (use and care guide A16345301).

Electrolux 1A / 2A wine cooler repair,
where we come out.

The same visit in every metro below: the code, the model number, and a diagnosis before any part is ordered.

All service areas
A couple choosing a bottle together from an undercounter wine cooler in a warm kitchen at dusk
For the heart of your home.

Questions
about 1A / 2A.

Can I clear 1A / 2A myself?
Hold the light button for 3 seconds to switch between 1A and 2A.
Why is my Electrolux wine cooler light on with the door closed?
The light setting is on 2A, which keeps it lit. Hold the light button for 3 seconds to switch to 1A.
Does 2A make my Electrolux wine cooler warmer?
Electrolux lists a light left on as a reason the unit is not cold enough, so yes, slightly.
How long does 1A or 2A stay on my Electrolux wine cooler display?
About 2 seconds, then the display returns to the set temperature.

Back to your everyday

Still showing 1A / 2A?

When you book, copy the code or the blink pattern as the display shows it, add the whole model number, and say whether the bottles still feel cool — a code gives the technician a head start.

(844) 709-0727 Schedule a repair