A wine cooler under a kitchen counter with its display dark, the cabinet door beside it open to show the plug and outlet, unlabeled bottles resting on the racks.

Electrolux Power Failure indicator: the wine cooler lost power

When power to an EI24WC10QS generation wine cooler is interrupted, the status dot goes out and Power Failure flashes with ALARM RESET below the On/Off key, without a tone.

(844) 709-0727

Mon–Sat, 8am–8pm

  • Power
  • Wine cooler diagnostic visit
  • Source: Electrolux

Book a visit

Three short steps, about a minute.

or call (844) 709-0727

What Power Failure
actually means.

When power to an EI24WC10QS generation wine cooler is interrupted, the status dot goes out and Power Failure flashes with ALARM RESET below the On/Off key, without a tone. A new unit shows it on first power-up because it was powered at the factory for testing.

Electrolux wine cooler display

What to do when Power Failure shows on the wine cooler

Before you book,
in this order.

Each step comes from Electrolux's own guidance for Power Failure on its wine coolers. Follow it to the end: the last card says whether this is a visit.

01

Press On/Off briefly to reset the indicator.

02

Check the cabinet temperature, since a long outage can let it warm.

03

If it keeps appearing without a known outage, check for a loose plug or a GFCI or breaker that trips, then book a visit.

Still there?

It usually turns into wine cooler diagnostic visit. Book with the code and the model number.

What not to do

Power Failure on a brand-new unit is expected and not a defect. It also does not mean power is still off; the unit is running again and reporting the gap.

What you may
notice with it.

The wine cooler problems Power Failure tends to arrive with. Answer these at the wine cooler before anyone is booked.

All problems

Where Power Failure usually leads

Wine cooler diagnostic visit.

In Electrolux's own words

If power to the appliance is interrupted the System Status indicator will turn-off
Electrolux use and care guide 242332800 (EI24WC10QS / EI24WL10QS, IQ-Touch) Electrolux use and care guide 242332800 (EI24WC10QS / EI24WL10QS, IQ-Touch)

Every code on this site is taken from the manufacturer's documentation, never from a forum or a parts listing. Electrolux EI24WC10QS and EI24WL10QS IQ-Touch wine coolers (use and care guide 242332800).

Electrolux Power Failure wine cooler repair,
where we come out.

The same visit in every metro below: the code, the model number, and a diagnosis before any part is ordered.

All service areas
A couple choosing a bottle together from an undercounter wine cooler in a warm kitchen at dusk
For the heart of your home.

Questions
about Power Failure.

Can I clear Power Failure myself?
Press On/Off briefly to reset the indicator. If it comes back, it needs a visit.
Why does my new Electrolux wine cooler show Power Failure?
It was powered at the factory for inspection and then unplugged. Press On/Off briefly and the indicator clears.
Why does Power Failure keep showing on my Electrolux wine cooler?
Short power drops are the usual cause. Electrolux advises against a GFI circuit for this unit, since nuisance tripping is common.
Does my Electrolux wine cooler beep for a power failure?
No. The indicator flashes silently; only door and temperature alarms sound.

Back to your everyday

Still showing Power Failure?

When you book, copy the code or the blink pattern as the display shows it, add the whole model number, and say whether the bottles still feel cool — a code gives the technician a head start.

(844) 709-0727 Schedule a repair