The touch control strip along the top of a glass-door wine cooler, a small padlock icon lit beside the temperature, unlabeled bottles lying on the wooden racks below.

Electrolux SLP on the wine cooler display: sleep mode for the panel

With sleep mode on, an EI24WC10QS generation control goes dark after 60 seconds without a key press, leaving only the System Status OK dot lit.

(844) 709-0727

Mon–Sat, 8am–8pm

  • Mode, not a failure
  • No repair needed
  • Source: Electrolux

Book a visit

Three short steps, about a minute.

or call (844) 709-0727

What SLP / nSL
actually means.

With sleep mode on, an EI24WC10QS generation control goes dark after 60 seconds without a key press, leaving only the System Status OK dot lit. Alarms wake the display. Holding Lock past Loc toggles between SLP and nSL.

Electrolux wine cooler display · also shown as SLP, nSL

What to do when SLP / nSL shows on the wine cooler

Before you book,
in this order.

Each step comes from Electrolux's own guidance for SLP / nSL on its wine coolers. Follow it to the end: the last card says whether this is a visit.

01

Touch any key to wake the panel before changing settings.

02

To stop the panel going dark, hold Lock past Loc until nSL shows.

03

If the status dot is also out and nothing wakes the panel, check power, then book a visit.

Cleared?

The display has gone quiet and the cabinet is back at its setting without a new part. Should the code reappear this week, or the reds start feeling warm again, book a visit and mention that it came back.

What not to do

A dark panel with the blue dot still lit is sleep mode, not a dead display. SLP is also not the Loc lock, though both are set from the same key.

What you may
notice with it.

The wine cooler problems SLP / nSL tends to arrive with. Answer these at the wine cooler before anyone is booked.

All problems

No repair indicated

Nothing to repair.

A setting someone switched on, often by leaning on the touch panel or left over from the showroom floor, rather than a part that wore out: a demo mode that lights the display and the rack lamps while the cooling never starts, a Sabbath setting that turns off the lights and alarms, a child or control lock that ignores every key press, a reminder that the glass door stood open. The cabinet is fine, and its own keys or its manual switch the mode back off.

In Electrolux's own words

until the display reads "SLP"
Electrolux use and care guide 242332800 (EI24WC10QS / EI24WL10QS, IQ-Touch) Electrolux use and care guide 242332800 (EI24WC10QS / EI24WL10QS, IQ-Touch)

Every code on this site is taken from the manufacturer's documentation, never from a forum or a parts listing. Electrolux EI24WC10QS and EI24WL10QS IQ-Touch wine coolers (use and care guide 242332800).

Electrolux SLP / nSL wine cooler repair,
where we come out.

The same visit in every metro below: the code, the model number, and a diagnosis before any part is ordered.

All service areas
A couple choosing a bottle together from an undercounter wine cooler in a warm kitchen at dusk
For the heart of your home.

Questions
about SLP / nSL.

Can I clear SLP / nSL myself?
Touch any key to wake the panel before changing settings.
Why does my Electrolux wine cooler display go dark by itself?
Sleep mode switches it off after 60 seconds idle. The blue status dot stays lit to show all is well.
How do I stop sleep mode on my Electrolux wine cooler?
Hold Lock past Loc until nSL appears. The display then stays on.
Will my Electrolux wine cooler still alarm in sleep mode?
Yes. An alarm wakes the display.

Back to your everyday

Still showing SLP / nSL?

When you book, copy the code or the blink pattern as the display shows it, add the whole model number, and say whether the bottles still feel cool — a code gives the technician a head start.

(844) 709-0727 Schedule a repair